VOLVO
PAM-U012600 - Lost Communication With Steering Angle Sensor Module. General Failure Information. No sub type information
System
Parkeringsassistent (PAM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Vis modeller per årsmodell og motor (5)
Hva betyr feilkoden?
The parking assistance module no longer receives replies from the steering angle sensor control module (SAS), although it communicates with it all the time. The fault lies in the control module that should send the signal, or in the wires and connectors between the control modules.
Mulige årsaker
- The fault lies in the control module that should send the signal (sending control module)
- A break or short-circuit in the CAN wires between the control modules
- Faulty software in the control module that stored the code, after a control module was replaced without new software being loaded
Hva du kan gjøre
- 1Read and clear the code, then test drive the car with the engine running to see whether it comes back
- 2Think about whether any control module has been replaced in the car without new software being loaded, and tell the workshop
- 3If you have a diagnostic tool, check whether codes are stored in the steering angle sensor control module (SAS) and in the central electronic module (CEM)
- 4Check that the connectors at the parking assistance module are firmly seated and free from oxidation
- 5Do not work on the steering yourself; have a workshop check the CAN wires and trace the control module that should send the signal
- 6If the code is stored only in the parking assistance module, have a workshop load the latest software into it
Symptomer du kan merke1
- Front or rear parking assistance does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.