Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    PAM-U030000
    VOLVO

    PAM-U030000 - Internal Control Module Software Incompatibility. General Failure Information. No sub type information

    System

    Parkeringsassistent (PAM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    6 modeller

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (6)
    • Volvo S60 (2011–)2011–2013
    • Volvo S80 (2007–)2007–2013
    • Volvo V60 (2011–)2011–2013
    • Volvo V70 (2008–)2008–2013
    • Volvo XC60 (2009–)2009–2013
    • Volvo XC70 (2008–)2008–2013

    Hva betyr feilkoden?

    The parking assistance module's internal software does not match the car, so its configuration ID differs from the one the central electronic module (CEM) sends out on the CAN network. The fault may be caused by a used control module having been fitted, or by a break in the CAN wires between the parking assistance module and the CEM.

    Mulige årsaker

    • Incorrect configuration ID, since the unit was never meant for this car, for instance a second-hand unit with other software or hardware
    • Open circuit in the CAN wires between the parking assistance module and the central electronic module (CEM)

    Hva du kan gjøre

    1. 1Read and clear the code, then test drive the car to see whether it comes back
    2. 2Consider whether the parking assistance module is a used control module that has been fitted to the car
    3. 3If you have a diagnostic tool, check whether communication codes are stored in the central electronic module (CEM); if they are, start the fault tracing there
    4. 4Check that the connectors on the CAN wires to the parking assistance module are firmly seated and free from oxidation
    5. 5Have a workshop load the parking assistance module with the software that is right for the car, as this is a programming job
    6. 6If the code comes back, have a workshop check the CAN wires between the parking assistance module and the CEM

    Symptomer du kan merke3

    • The parking assistance system does not work
    • The information lamp is lit
    • Message in the text display

    Hva feilen kan påvirke2

    • The parking assistance module switches itself off from the CAN network (bus-off)
    • While the code is stored, the module responds to diagnostic commands, but the normal CAN communication does not work

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.