VOLVO
PAM-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
System
Parkeringsassistent (PAM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The parking assistance module has not received information about the car's current configuration from the central electronic module (CEM), so the configuration is not complete. The fault points to contact resistance, oxidation, a break or a loose contact in the connections to the CAN network, and the central electronic module should be traced first.
Mulige årsaker
- Contact resistance, oxidation, a break or a loose contact in the connections to the CAN network
- The fault lies in the sending control module, the central electronic module (CEM)
Hva du kan gjøre
- 1Read and clear the code, then test drive the car to see whether it comes back
- 2If you have a diagnostic tool, check first whether codes are stored in the central electronic module (CEM)
- 3Check that the connections to the CAN network, at the parking assistance module and at the central electronic module, are firmly seated and free from oxidation
- 4Have a workshop check the CAN wires between the parking assistance module and the central electronic module for breaks
- 5Have a workshop trace the central electronic module and replace it only if it has an internal fault
Symptomer du kan merke3
- Front or rear parking assistance does not work
- Yellow warning symbol and text message in the display
- Text message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.