VOLVO
PBM-U030000 - Internal Control Module Software Incompatibility. General Failure Information. No sub type information
System
Drivlinje (Motor og girkasse)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The parking brake module (PBM) checks its own configuration ID against the signal setup that the central electronic module (CEM) broadcasts on the CAN bus. All control modules on the bus must have the same ID to be able to communicate. The fault code is stored when the parking brake module's ID differs from the one the CEM sends, and
Mulige årsaker
- Incorrect configuration ID, for example a used control module that is not intended for this particular car
Hva du kan gjøre
- 1Has the control module been replaced recently, for example with a used one? It may be intended for another car or lack the correct software; have a workshop check this
- 2If you have a diagnostic tool: read the fault codes in the CEM and see whether it also has communication fault codes
- 3If the fault returns, have a workshop program the parking brake control module with the correct and latest software
- 4If fault code PBM-U014000 is also present, the fault most likely lies in the communication with the CEM, and the parking brake control module should then not be replaced
- 5The parking brake is a safety function: have a workshop check it if it does not work as it should
Symptomer du kan merke3
- Information lamp is on
- Message in the text display
- Electric parking brake does not work
Hva feilen kan påvirke2
- The parking brake control module works with limited function in emergency mode
- The control module still responds to diagnostic commands while the fault code is stored
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.