VOLVO
PBM-U210000 - Control Module Not Configured. General Failure Information. No sub type information
System
Drivlinje (Motor og girkasse)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The parking brake control module (PBM) receives information about the car's current configuration from the central electronic module (CEM). The fault code is stored when the configuration from the CEM is lost, and The fault may lie in the CEM, or the configuration may not have been read in correctly during a software download.
Mulige årsaker
- Fault in the central electronic module (CEM), which should send the vehicle configuration
- The vehicle configuration was not read in correctly when new software was downloaded
Hva du kan gjøre
- 1Read the fault code, clear it and test drive the car using the parking brake to see whether it returns
- 2If you have a diagnostic tool: check whether PBM-U210100 is also present; the two are related and are checked together
- 3If the fault returns, have a workshop read in the correct vehicle configuration and check the CEM
- 4The parking brake is a safety function: have a workshop check it if it does not work as it should
Symptomer du kan merke3
- Information lamp is on
- Message in the text display
- Electric parking brake works with reduced function
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.