VOLVO
PDM-B118D04 - Invalid data received from "Door Control Module A". General Failure Information. System Internal Failures
System
Passasjerdør (PDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
Although the code refers to invalid data from a door control module, the fault concerns the right camera module (RCM). The front right door module communicates with it over the LIN bus. The fault is stored when internal parts of the right camera module do not work, and then the LED does not light.
Mulige årsaker
- Internal fault in the camera module
Hva du kan gjøre
- 1Check that the relevant fuses are intact
- 2Test drive the car and check whether the right-hand blind spot warning works
- 3With a diagnostic tool, you can see which fault codes the right camera module has stored
- 4Look for damage and loose connections in the wiring to the camera module
- 5If the wiring is fine, have a workshop check or replace the camera module, since the fault is inside it
Symptomer du kan merke2
- LED does not light
- A message appears in the information display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.