VOLVO
PDM-B119000 - Left rear window. General Failure Information. No sub type information
System
Passasjerdør (PDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The left rear window has lost its position information, so the automatic window operation stops for that window. This can be because initialization was never done, because the setting was lost after a voltage drop while the window lift was in use, or because the power to the control module was interrupted.
Mulige årsaker
- Initialization was not carried out
- The position setting was lost after a voltage drop when the window lift was activated
- Power to the control module was interrupted
Hva du kan gjøre
- 1Check that the control module in the rear door gets power: the fuses should be intact and the connections secure
- 2Try the automatic operation from the rear door switch by pressing two steps up
- 3Move the window manually to its upper turning position
- 4Initialization of the window's position should be done by a workshop
- 5Afterwards, check that the automatic operation works and that the fault code does not return
Symptomer du kan merke1
- Automatic window operation is not working
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.