VOLVO
PDM-B12BA15 - Lock Status LED - Front. General Electrical Failures. Circuit short to battery or open
System
Passasjerdør (PDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Vis modeller per årsmodell og motor (5)
Hva betyr feilkoden?
The driver or passenger door module (DDM/PDM) monitors the LED in the central locking button that shows the locked or unlocked state. The control module has registered that the current on the output is too low when it tries to light the LED. The cause may be a supply cable short-circuited to battery voltage, a break in the supply cable, or poor contact.
Mulige årsaker
- Supply short-circuited to battery voltage
- Break in the supply cable
- Contact resistance, oxidation or poor contact in the connections
Hva du kan gjøre
- 1Check that the relevant fuses are intact
- 2Watch the LED in the central lock button when you lock and unlock the car and note whether it shows anything
- 3Use a multimeter to check that the supply wire to the LED has neither a break nor contact with battery voltage
- 4Check the connections at the central lock button for oxidation and loose contacts
- 5Remedy as needed, then check that the LED shows the locked and unlocked states
Symptomer du kan merke1
- The LED in the central lock button does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.