VOLVO
PDM-B12BB11 - Lock Status LED - Rear. General Electrical Failures. Circuit short to ground
System
Passasjerdør (PDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Vis modeller per årsmodell og motor (5)
Hva betyr feilkoden?
The control modules in the rear doors (LDM/RDM) power the LED in the central lock button that shows the locked or unlocked state, and they send information about it to the driver or passenger door module (DDM/PDM). The control module has registered a signal voltage that is too low when it tries to light the LED. The cause is a power supply cable short-circuited to ground.
Mulige årsaker
- Power supply cable short-circuited to ground
- Moisture and/or oxidation in the connections
Hva du kan gjøre
- 1Check that the relevant fuses are intact
- 2Test the central locking and note whether the LED in the button changes state
- 3Use a multimeter to check that the supply wire to the LED is not short-circuited to ground (the body)
- 4Look for moisture and oxidation in the connectors and wiring to the rear door control module and remedy them
- 5Remedy as needed, then check that the LED shows the locked and unlocked states
Symptomer du kan merke1
- Switch indication does not work
Hva feilen kan påvirke1
- The control module stops powering the LED in the central lock button
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.