VOLVO
PDM-B12BC11 - Mirror Position Sensor Supply. General Electrical Failures. Circuit short to ground
System
Passasjerdør (PDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Vis modeller per årsmodell og motor (5)
Hva betyr feilkoden?
The driver's and passenger door module (DDM/PDM) supplies voltage to the position sensors in the mirrors, so the module can tell where each mirror is set. The module has registered a reading below the expected level on the signal line, which points to the supply being shorted to ground.
Mulige årsaker
- Short to ground in the supply cable to the mirror position sensors
- Moisture and/or oxidation in the connections
Hva du kan gjøre
- 1Read the code, clear it and adjust the mirrors electrically to see whether the code comes back
- 2Check the fuses for the door modules and mirrors in the fuse box; if a fuse has blown, look for a short to ground before a new fuse is fitted
- 3Check the connectors at the mirrors and the door module for moisture, oxidation and loose contact
- 4Use a multimeter to check that the supply wire to the mirrors has no contact with ground (the body)
- 5If you have diagnostic equipment, read the mirror position values in live data while you adjust the mirrors and check that they follow the movement
- 6If the wiring is intact but the code comes back: have a workshop check the door module
Symptomer du kan merke1
- Electrical adjustment of the mirrors does not work
Hva feilen kan påvirke1
- The module stops supplying voltage to the mirror position sensors
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.