VOLVO
PDM-B12DE01 - Front Window Local Up Switch. General Failure Information. General electrical failure
System
Passasjerdør (PDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Vis modeller per årsmodell og motor (5)
Hva betyr feilkoden?
The driver and passenger door modules (DDM/PDM) continuously check the signal from the switch that operates the electric window. If the switch for raising the window has been held in for a long time, or if the signal cable is shorted to ground, the code is set. The module then ignores the signal until a switch that is not pressed is detected.
Mulige årsaker
- The button has jammed in the pressed-in position
- The signal cable is shorted to ground
- Damaged local control for operating the window lift
Hva du kan gjøre
- 1Read the code, clear it and check that the switch returns when released and does not stick
- 2Check the fuses for the window lifts in the fuse box and make sure they are intact
- 3Check that the switch is secure in the door panel and that the connectors behind it are free from moisture and oxidation
- 4Use a multimeter to check that the wire to the switch has no contact with ground (the body)
- 5If you have diagnostic equipment, read the switch signal in live data and check that it returns to the not-pressed state when the switch is released
- 6If the fault remains: have a workshop check the switch and the door module
Symptomer du kan merke1
- The electric window does not work, works with reduced function or works incorrectly
Hva feilen kan påvirke1
- The control module ignores the signal from the switch until a switch that is not pressed is detected
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.