VOLVO
PDM-B12E123 - Front Door Unlock Switch - Interior. General Signal Failures. Signal stuck low
System
Passasjerdør (PDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Vis modeller per årsmodell og motor (5)
Hva betyr feilkoden?
The driver and passenger door modules (DDM/PDM) check the signal from the central locking unlock button inside the door. If the button has been held in for a long time, or if the signal cable is shorted to ground, the code is set. The module then ignores the signal until a button that is not pressed is detected.
Mulige årsaker
- The button has jammed in the pressed-in position
- The signal cable is shorted to ground
- Moisture and/or oxidation in the connections
- Damaged local lock control
Hva du kan gjøre
- 1Read the code, clear it and check that the button returns when released and does not stick
- 2Check the fuses in the fuse box and make sure they are intact
- 3Check that the button is secure in the door panel and that the connectors behind it are free from moisture and oxidation
- 4Use a multimeter to check that the wire to the button has no contact with ground (the body)
- 5If you have diagnostic equipment, read the button signal in live data and check that it returns to the not-pressed state when released
- 6If the fault remains: have a workshop check the lock control and the door module
Symptomer du kan merke3
- Central locking with the button in the door panel does not work
- The interior door lock does not work
- Locking and unlocking with the central locking does not work
Hva feilen kan påvirke1
- The control module ignores the signal from the button until a button that is not pressed is detected
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.