VOLVO
PDM-B1B7086 - LIN Bus Circuit #2. Bus Signal / Message Failures. Signal invalid
System
Passasjerdør (PDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The driver and passenger door modules (DDM/PDM) send and receive information via LIN, a standardised serial communication method. On LIN bus 2 they communicate with the left and right camera control modules. The module has detected that a signal is invalid.
Mulige årsaker
- The fault lies in the control module that sends the signal
Hva du kan gjøre
- 1Read and clear the code, then run a test drive and check whether the LED lights
- 2Check the fuses in the fuse box and make sure they are intact
- 3Check the connectors at the door module and at the camera for moisture, oxidation and loose contact
- 4Check that the cable on LIN bus 2 is intact and free from visible damage
- 5Have a workshop check the control module that sends the signal, using diagnostic equipment
Symptomer du kan merke1
- An LED does not light
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.