VOLVO
PDM-DD20 - LIN communication camera module Internal fault
System
Passasjerdør (PDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Hva betyr feilkoden?
The PDM talks to the camera on the passenger side over LIN, a standardised serial communication method. The module has logged a fault inside its link with the camera, and the code is set as a result.
Mulige årsaker
- A fault inside the camera in the passenger door
Hva du kan gjøre
- 1Activate the blind spot system and check that the LEDs flash three times; then start the engine and check that the LED works
- 2Read the code, clear it and run a test drive. If the code does not come back, no further action is needed, as the fault may have been temporary
- 3Check that the connectors at the camera and the door module are secure and free from moisture and oxidation
- 4Check that the wire between the door module and the camera is intact and free from visible damage
- 5If the fault remains: have a workshop check the camera on the passenger side and replace it if needed
Symptomer du kan merke2
- The LED does not light
- A message is shown in the information display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.