VOLVO
PDM-U040100 - Invalid Data Received from ECM/PCM A. General Failure Information. No sub type information
System
Passasjerdør (PDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Vis modeller per årsmodell og motor (5)
Hva betyr feilkoden?
The driver and passenger door modules (DDM/PDM) continuously receive outdoor temperature information from the engine control module (ECM) and check its quality. If the quality of the signal is lower than the module can accept, the code is set.
Mulige årsaker
- The fault lies in the engine control module (ECM)
Hva du kan gjøre
- 1If you have diagnostic equipment, read the codes in the engine control module (ECM) first, as the fault is located there
- 2Clear the code only after the fault in the engine control module has been put right, then check whether it comes back
- 3Have a workshop trace the fault in the engine control module, as the source of the fault is there
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The door module uses the temperature signal from its own built-in sensor instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.