VOLVO
PDM-U201208 - Car Configuration Parameter(s). General Failure Information. Bus Signal / Message Failures
System
Passasjerdør (PDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The driver or passenger door module (DDM/PDM) continuously receives information about the car's configuration from the central electronic module (CEM). The fault is stored when this information is lost, which means communication between the modules has broken down. Fault-finding should start in the CEM, because the cause is found there.
Mulige årsaker
- Fault in the central electronic module (CEM)
Hva du kan gjøre
- 1Read and note the codes in the central electronic module (CEM) first, since fault-finding should start there
- 2Clear the code and road test the car to see whether it comes back
- 3Check that the fuses are intact; see the owner's manual for where they are
- 4Check that the connectors to the door module are secure and free from corrosion
- 5Have a workshop with diagnostic equipment check the central electronic module (CEM) and the communication in the car if the fault comes back
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.