VOLVO
PSCM-C102D68 - High Friction Inside Power Steering. Algorithm Based Failures. Bus Signal / Message Failures
System
Servostyringsmodul (PSCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerV40 (2013–), V40 Cross Country (2013–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The power steering control module (PSCM) has measured friction in the steering system that is too high, and a message fault has also occurred. This code is an information code and does not in itself mean that the control module is faulty.
Mulige årsaker
- Damaged power steering control module (PSCM)
Hva du kan gjøre
- 1Clear the fault code and test drive to see whether it returns
- 2Check that the steering column and steering do not bind or get blocked
- 3Have a workshop read the control module's messages on the bus with diagnostic equipment
- 4Safety note: steering is safety-critical, so have a workshop decide whether the control module should be replaced
Symptomer du kan merke3
- Steering requires extra or uneven effort
- Other steering or handling problems
- Unusual noise from the steering, unsure when, or at all times
Hva feilen kan påvirke1
- Steering function may be reduced
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.