VOLVO
PSCM-U000100 - High Speed CAN Communication Bus. General Failure Information. No sub type information
System
Servostyringsmodul (PSCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2011–)2011–2013
- Volvo S60 (2011–)2014–2015Alle motorer unntatt: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2010Kun motor: D4164T
- Volvo S80 (2007–)2011–2015
- Volvo V60 (2011–)2011–2013
- Volvo V60 (2011–)2014–2015Alle motorer unntatt: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Kun motor: D4164T
- Volvo V70 (2008–)2011–2015
- Volvo XC60 (2009–)2011–2015
- Volvo XC70 (2008–)2011–2015
Hva betyr feilkoden?
Communication on the HS-CAN bus has been interrupted, either by another control module on the bus or by the control module's own messages interfering with the network. The power steering control module then cannot be reached, and the power steering regulation does not work.
Mulige årsaker
- Short circuit between the CAN wiring
- Open circuit in the CAN wiring
- Internal fault in another control module on the same part of the CAN network
- Internal fault in the control module
Hva du kan gjøre
- 1Check that the battery is charged and that the fuses for the power steering are intact
- 2If you have a diagnostic tool: read off the fault codes in the other control modules and start with those
- 3Gently shake the wiring and connectors at the power steering while checking, to see whether the fault shows up
- 4Safety note: steering is safety-critical, so have a workshop with diagnostic equipment measure the CAN network
Symptomer du kan merke1
- The power steering regulation does not work
Hva feilen kan påvirke3
- The control module shuts itself off ("bus-off")
- It remains shut off until its power is interrupted
- When the power supply is reconnected, the control module tries to communicate again
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.