VOLVO
PSCM-U012900 - Lost Communication With Brake System Control Module. General Failure Information. No sub type information
System
Servostyringsmodul (PSCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2011–)2011–2013
- Volvo S60 (2011–)2014–2015Alle motorer unntatt: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2010Kun motor: D4164T
- Volvo S80 (2007–)2011–2015
- Volvo V60 (2011–)2011–2013
- Volvo V60 (2011–)2014–2015Alle motorer unntatt: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Kun motor: D4164T
- Volvo V70 (2008–)2011–2015
- Volvo XC60 (2009–)2011–2015
- Volvo XC70 (2008–)2011–2015
Hva betyr feilkoden?
The power steering control module receives no speed data for the car from the brake control module (BCM) over CAN, so it falls back to a standard value. The fault lies in the control module that sends the information.
Mulige årsaker
- Fault in the control module that sends the information
Hva du kan gjøre
- 1Clear the fault code and test drive to see whether it returns
- 2If you have a diagnostic tool: check whether the brake control module (BCM) has its own fault codes and start with those
- 3Check the connectors at the power steering and at the brake control module
- 4Safety note: brakes and steering are safety systems, so have a workshop carry out the communication check
Symptomer du kan merke3
- Abnormally light steering at high speed
- Abnormally sluggish steering at low speed
- Other steering or handling problems
Hva feilen kan påvirke1
- The vehicle speed signal is replaced by a standard value
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.