VOLVO
PSCM-U210000 - Control Module Not Configured. General Failure Information. No sub type information
System
Servostyringsmodul (PSCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2011–)2011–2013
- Volvo S60 (2011–)2014–2015Alle motorer unntatt: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2010Kun motor: D4164T
- Volvo S80 (2007–)2011–2015
- Volvo V60 (2011–)2011–2013
- Volvo V60 (2011–)2014–2015Alle motorer unntatt: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Kun motor: D4164T
- Volvo V70 (2008–)2011–2015
- Volvo XC60 (2009–)2011–2015
- Volvo XC70 (2008–)2011–2015
Hva betyr feilkoden?
The control module has not received the vehicle configuration from the central electronic module (CEM), and the fault is stored when it is missing. Until the configuration arrives, the control module is not configured for the car.
Mulige årsaker
- Fault in the central electronic module (CEM), which sends the vehicle configuration
Hva du kan gjøre
- 1Read the fault code, note it and clear it
- 2Check that the fuses are intact
- 3Road test the car and note whether the power steering behaves abnormally
- 4If the fault comes back, have a workshop read the central electronic module (CEM), since the configuration is sent from there
- 5Steering is a safety system: have a workshop check the car if the steering feels abnormal
Symptomer du kan merke2
- Yellow warning symbol and message in the display
- Power steering assistance control does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.