VOLVO
PSCM-U300071 - Control Module. Mechanical Failures. Actuator stuck
System
Servostyringsmodul (PSCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2011–)2011–2013
- Volvo S60 (2011–)2014–2015Alle motorer unntatt: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2010Kun motor: D4164T
- Volvo S80 (2007–)2011–2015
- Volvo V60 (2011–)2011–2013
- Volvo V60 (2011–)2014–2015Alle motorer unntatt: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Kun motor: D4164T
- Volvo V70 (2008–)2011–2015
- Volvo XC60 (2009–)2011–2015
- Volvo XC70 (2008–)2011–2015
Hva betyr feilkoden?
The control module has detected that the power steering hydraulic pump motor does not start, and the fault code is set when this happens.
Mulige årsaker
- Too low battery voltage
- Incorrect voltage supply
- Mechanical or hydraulic fault in the steering system, for example a blocked hose, a blocked pipe or a fault in the steering gear
- Damaged power steering control module (PSCM)
Hva du kan gjøre
- 1Check the battery charge and voltage, since too low voltage can cause this fault
- 2Check that the fuses are intact and that the earth points are clean and securely connected
- 3If you have a diagnostic tool: activate the pump motor with the tool and listen for it to start
- 4Check mechanically that the steering does not bind and that hoses and pipes are not blocked
- 5If the fault returns and no fault is found, have a workshop check the control module, which may need replacing
- 6Steering is a safety system: have a workshop check the car if the steering feels abnormal
Symptomer du kan merke2
- Steering requires extra or uneven effort
- Yellow warning symbol and message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.