VOLVO
PSL-0003 - Hall sensor 3. Faulty signal
System
Drivlinje (Motor og girkasse)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013)
Vis modeller per årsmodell og motor (3)
Hva betyr feilkoden?
The left front seat module (PSL) receives no Hall sensor pulse from motor 3, which raises and lowers the rear edge of the seat. The fault is stored when the pulse is missing while the motor is activated.
Mulige årsaker
- Damaged Hall sensor in motor 3
- Signal wire shorted to ground or supply voltage
- Open circuit in the signal wire to the Hall sensor
Hva du kan gjøre
- 1Read and note the fault code, clear it and raise and lower the rear edge of the seat to see whether it returns
- 2If you have a diagnostic tool: read Hall sensor 3 in live data and check that the value counts up and down as the seat's rear edge is raised and lowered
- 3Check that the connector to the seat height motor at the rear edge is secure and clean
- 4Use a multimeter to check that the signal wire to the Hall sensor is continuous and not shorted to ground or supply voltage
- 5If the fault returns, have a workshop check the motor and Hall sensor for the rear edge height
Symptomer du kan merke1
- Automatic operation of the seat or mirrors does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.