VOLVO
PSM-E003 - Configuration fault. Faulty configuration
System
Elektrisk sete (PSM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The power seat control module (PSM) has an incorrect configuration ID for the CAN network. It compares its number with the one sent by the central electronic module (CEM), and if they do not match, or if communication with the central electronic module is interrupted, the code is set. The module responds to diagnostics, but normal network communication does not work.
Mulige årsaker
- Wrong configuration ID for the CAN network; the module may be a secondhand unit carrying other software or hardware than the car needs
- Break in the CAN wire between the seat module and the central electronic module (CEM)
Hva du kan gjøre
- 1Check that the seat control module is intended for this specific car. A used module fitted without the correct software can give this code
- 2First read the codes in the central electronic module (CEM) and fix any communication faults stored there
- 3With the battery negative lead disconnected, use a multimeter to check that the CAN wire to the central electronic module has no open circuit
- 4Have a workshop program the seat control module with the correct software for the car
- 5Clear the code after the repair and road test the car. If it returns, have a workshop continue fault-tracing with diagnostic equipment
Symptomer du kan merke2
- Power seat with memory function does not work at all
- Automatic seat and door mirror adjustment does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.