VOLVO
RDAR-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2011–), S80 (2007–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The radio receiver (RDAR) receives information about the car's actual configuration from the central electronic module (CEM). If it has lost that information, the receiver's start-up configuration has not been completed, and the code is set.
Mulige årsaker
- Fault in the central electronic module (CEM), which sends the configuration and must be fault-traced first
Hva du kan gjøre
- 1Read the codes in the central electronic module (CEM) and fix them first
- 2Check that the connectors on the CAN network are firmly seated and free from oxidation and breaks
- 3Check that the battery is in good condition and that its terminals are tight
- 4Clear the code after the work and check that it does not come back
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.