VOLVO
RDAR-U300046 - Control Module. System Internal Failures. Calibration / parameter memory failure
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2011–), S80 (2007–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The digital radio receiver (RDAR) has detected that its internal memory for calibration and parameter data is not working correctly. The cause is faulty software in the receiver, so the first remedy is to download new software into it. The driver normally notices nothing from the fault.
Mulige årsaker
- Faulty software in the digital radio receiver
Hva du kan gjøre
- 1Read the fault code with a diagnostic tool, clear it and test drive the car to see whether it returns
- 2Have a workshop download new software into the digital radio receiver, since the cause is faulty software
- 3If the fault remains after the software update, have a workshop replace the digital radio receiver (RDAR)
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.