VOLVO
REM-4A44 - Fuel level, gas. Faulty signal
System
Bakre elektronikk (REM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The code concerns the signal from the sensor for the gas level in the gas tank. With the engine running, the control module registers that the level does not change although there is gas in the tank, and the code is set. The gas level gauge then does not work, and the trip computer may show the tank as empty too early.
Mulige årsaker
- Defective sensor for the gas level in the gas tank
- The sensor gives an incorrect signal
Hva du kan gjøre
- 1If you have a diagnostic tool, follow the gas level in live data while you fill gas and check that the value rises
- 2Clear the fault code and test drive the car, and note whether it comes back
- 3Check the connector and the wire to the gas level sensor for chafing and loose contacts
- 4If the fault remains after these checks, have a workshop replace the gas level sensor
Symptomer du kan merke4
- The trip computer shows the tank empty too early
- The fuel level gauge does not work
- The fuel gauge reads zero although there is fuel in the tank
- The gas level gauge does not work
Hva feilen kan påvirke1
- The fuel level is set to zero
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.