VOLVO
REM-6A11 - Door switch. Signal too high
System
Bakre elektronikk (REM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The REM registers too high a signal from a door switch, which normally shows that the door is closed. The cause is that the switch is shorted to supply voltage. The module reads the switches with short voltage pulses, and the fault can give a wrong door alarm and a warning lamp on the instrument panel.
Mulige årsaker
- The switch indicating a closed door is shorted to supply voltage
Hva du kan gjøre
- 1With the ignition on, read the door status and open and close the doors one at a time. The status for each door should change when it is opened and closed
- 2If the status does not change, the fault is permanent and the circuit for the door showing the fault should be checked
- 3Check the connector and wiring at the door for chafing, loose connectors and damage
- 4Use a multimeter to check that the wire to the switch has no contact with the positive supply
- 5If the fault remains, have a workshop with diagnostic equipment check the switch and the control module
Symptomer du kan merke3
- General warning lamp on
- Message shown in the text display
- The door alarm does not trigger
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.