VOLVO
REM-8D13 - Stop lamp. Signal too high / Signal missing
System
Bakre elektronikk (REM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
1 modellS80 (1999–2006)
Vis modeller per årsmodell og motor (1)
Hva betyr feilkoden?
The module (REM) keeps watch on what it sends to the LED stop lamps. The fault code is stored if it registers too high a signal or a break in that wiring, and the stop lamp then either stays off or stays on all the time.
Mulige årsaker
- Break in the wiring to the stop lamps
- Wiring to the stop lamps has a short to supply voltage
- Defective stop lamp
Hva du kan gjøre
- 1Check the connectors at the rear electronic module and at the tail lamps for contact resistance, oxidation and looseness, and look carefully for damage
- 2With the ignition off, use a multimeter to check that the wiring to the stop lamp has neither a break nor contact with supply voltage
- 3If no fault is found, try a new stop lamp
- 4If the fault remains, have a workshop with diagnostic equipment investigate the wiring and the control module
Symptomer du kan merke2
- The stop lamps do not light when the brake pedal is pressed
- The stop lamp stays lit all the time
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.