VOLVO
REM-8D14 - Brake lamps (LED) Signal too high
System
Bakre elektronikk (REM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
1 modellXC90 (2003–)
Vis modeller per årsmodell og motor (1)
Hva betyr feilkoden?
The rear electronic module (REM) powers the LED stop lamps directly from an output. The fault code is set when the signal at that output is too high, because the signal cable is shorted to supply voltage or an LED stop lamp is not fitted, and the stop lamp then stays lit.
Mulige årsaker
- Signal cable shorted to supply voltage
- An LED stop lamp is not fitted
Hva du kan gjøre
- 1With the ignition off, use a multimeter to check that the signal cable to the stop lamps has no break and no contact with supply voltage
- 2Check that every LED stop lamp is fitted
- 3If the fault remains, have a workshop with diagnostic equipment check the wiring and the REM
Symptomer du kan merke1
- The stop lamp stays lit all the time
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.