VOLVO
REM-8F13 - Bi-Xenon lamp position sensor. Calibration fault
System
Bakre elektronikk (REM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (5)
Hva betyr feilkoden?
The module (REM) has found a Bi-Xenon position sensor that is not calibrated correctly. The fault may be a sensor that is fitted incorrectly, or a calibration carried out with a load in the car or on an uneven surface, and the road illumination then does not work.
Mulige årsaker
- The xenon lamp position sensor is fitted incorrectly
- The calibration was run with a load in the car or on an uneven surface
Hva du kan gjøre
- 1Make sure the Bi-Xenon position sensor sits properly in place
- 2Have a workshop with diagnostic equipment recalibrate the position sensor, since calibration is a workshop task
- 3On cars with Four-C, the calibration is made through the suspension control module (SUM)
Symptomer du kan merke1
- The road surface is not illuminated
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.