VOLVO
REM-DD28 - Wrong V-Lite / LIN_L9 configuration
System
Bakre elektronikk (REM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellXC90 (2003–)
Vis modeller per årsmodell og motor (1)
Hva betyr feilkoden?
The rear electronic module (REM) receives the car's setup data from the CEM, which is the central electronic module. The code is set when the REM's signal configuration does not match the car. The cause is incorrect software downloaded into the REM, and the alarm then cannot be activated.
Mulige årsaker
- Incorrect software has been downloaded into the REM
Hva du kan gjøre
- 1The fault is caused by the wrong software in the REM, so clearing the code alone will not fix it
- 2Have a workshop check which software the REM has and download the correct software for the car
- 3Then check that the alarm can be activated again
Symptomer du kan merke2
- The alarm cannot be activated
- The alarm does not start, with no audible or visible signal
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.