Hva betyr feilkode REM-E010?

Diagnose og feilkodedefinisjon for REM-E010 (Volvo S60 (2001–2009), Volvo S80 (1999–2006), Volvo V70 (2000–2008)). Bestill reparasjon hos OBD Tuning.

VOLVO

REM-E010 - Power supply control module. Signal too low

System

Bakre elektronikk (REM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

5 modeller

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

Vis modeller per årsmodell og motor (5)

Hva betyr feilkoden?

The REM checks its own power supply against the voltage reported for the CEM on the CAN network. The code is set when the REM's supply sits too low compared with that.

Mulige årsaker

Partly burnt fuse for the REM
Damaged power supply cable to the REM
Loose ground connection to the REM
Contact resistance or oxidation in the connections

Hva du kan gjøre

1With diagnostic equipment and the engine running, compare the supply voltage to the REM with that to the CEM; they should be roughly equal
2Check that the connectors at the REM are fully seated and free from oxidation
3Check the fuse for the REM and see whether it is partly burnt or burnt
4Check that the screw connection from the battery to the REM is tight and free from oxidation
5Check the ground connection to the REM; it should be tight and free from oxidation. Remedy the fault, clear the code and road test the car with the engine running

Symptomer du kan merke5

Central locking does not work at all
The fuel gauge shows zero although there is fuel
Rear window heating does not work
The tail lamps do not work
The folding headrest does not work

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.