VOLVO
SAS-0009 - Steering wheel angle signal IY. Signal too high. Intermittent fault
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The steering wheel angle sensor has registered that the signal from angle channel IY is too high. The fault is intermittent, meaning it has occurred at some point but may not be active right now. The cause lies in the sensor's circuits, in the connections to them, or in the sensor control module.
Mulige årsaker
- Contact resistance or oxidation in connections and connectors
- Short circuit to voltage supply
- Open circuit in the wiring
- Defective control module for the steering wheel angle sensor
Hva du kan gjøre
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check that the connectors at the steering wheel angle sensor are secure and free from corrosion
- 3Follow the wiring from the sensor and look for chafing, pinching and loose clips
- 4With diagnostic equipment, follow the IY signal in live data while turning the wheel slowly; it should change smoothly
- 5The fault affects the stability system, so have a workshop repair it promptly if it returns
Symptomer du kan merke3
- Anti-spin warning lamp on
- Stability control function not working
- Anti-spin function not working
Hva feilen kan påvirke2
- Stability control function disconnected
- Anti-spin function blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.