VOLVO
SAS-000F - Steering wheel angle sensor. Internal fault
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2001–2009)2005–2009
- Volvo S80 (1999–2006)2005–2006
- Volvo V70 (2000–2008)2005–2008
- Volvo V70 XC / XC70 (2001–2007)2005–2007
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
A fault inside the steering wheel angle sensor means the signals it reads from the code wheel do not agree with each other. The fault disconnects the stability control function. The sensor is fitted to the underside of the contact reel and is changed together with that part.
Mulige årsaker
- Fault inside the steering wheel angle sensor
Hva du kan gjøre
- 1Read and note the code, clear it and road test to see whether it returns
- 2Turn the steering wheel fully to the right, then fully to the left, and read the code again
- 3If you have a diagnostic tool, follow the counters for the fault status: many incorrect driving cycles point to a recurring fault, few to a temporary one
- 4If the fault returns, have a workshop replace the contact reel with the steering wheel angle sensor, and the steering wheel module (SWM) if it still returns
- 5The stability system is off while the fault is present, so have a workshop repair it promptly
Symptomer du kan merke1
- Anti-spin warning lamp is on
Hva feilen kan påvirke1
- Stability function blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.