VOLVO
SAS-0010 - Steering wheel angle signal IY. Signal too low. Intermittent fault
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The signal from steering wheel angle channel IY is too low, and the fault is intermittent: it has occurred at some point but does not always show. The cause lies in connectors and wiring to the sensor, or in the sensor element itself.
Mulige årsaker
- Contact resistance or oxidation in connections and connectors
- Open circuit in the wiring
- Short circuit to ground
- Defective sensor element in the steering wheel angle sensor
Hva du kan gjøre
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check that the connectors at the steering wheel angle sensor are secure and free from corrosion
- 3Using a multimeter, check that the wiring from the sensor is not short-circuited to ground (the body)
- 4Follow the wiring from the steering wheel angle sensor and look for chafing, pinching and loose clips
- 5If you have a diagnostic tool: follow signal IY in live data while turning the wheel, and see whether the value stays low or jumps in some positions
- 6The stability function stays off while the fault is present, so have a workshop repair it promptly if it returns
Symptomer du kan merke3
- Anti-spin warning lamp comes on
- Stability control function not working
- Anti-spin function not working
Hva feilen kan påvirke2
- Stability control function disconnected
- Anti-spin function blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.