VOLVO
SAS-0015 - Steering wheel position signal R3. Signal too high. Intermittent fault
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
Steering wheel position signal R3 reads too high. The fault is intermittent: it has occurred at some point but may not be present right now. Possible causes are poor contact, a short to supply voltage, an open circuit, or a defective control module.
Mulige årsaker
- Contact resistance or oxidation in connections and connectors
- Short circuit to supply voltage
- Open circuit
- Defective control module
Hva du kan gjøre
- 1Clear the code and road test the car to see whether it returns
- 2Check that the connectors at the steering wheel angle sensor are firmly seated, clean and free from corrosion
- 3Follow the cable from the sensor and look for breaks, chafing and pinched sections
- 4With diagnostic equipment, watch signal R3 in live data while turning the wheel; it should follow the wheel without sudden jumps
- 5Stability control is off while the fault is present, so have a workshop repair it promptly if it returns
Symptomer du kan merke3
- Anti-spin warning lamp on
- Stabilising function absent
- Anti-spin not working
Hva feilen kan påvirke2
- Stability function disconnected
- Anti-spin function blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.