VOLVO
SAS-0016 - Steering wheel position signal R3. Signal too low. Intermittent fault
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
Steering wheel position signal R3 reads too low. The fault is intermittent and may have occurred at some point without being active now. It can stem from poor connectors, breaks in the wiring, a short to ground, or a faulty SAS element.
Mulige årsaker
- Contact resistance or oxidation at connections and connectors
- Break in the wiring
- Short to ground
- Faulty SAS element
Hva du kan gjøre
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check that the connectors at the sensor are fully engaged, clean and free from corrosion
- 3Look along the wiring from the sensor for breaks, chafing and pinched sections
- 4With a multimeter, check whether any wire from the sensor touches the body (ground)
- 5Stability control stays off while the fault is present, so have a workshop repair it promptly
Symptomer du kan merke3
- Anti-spin warning lamp is on
- Stability function not working
- Anti-spin does not work
Hva feilen kan påvirke2
- Stability control disconnected
- Anti-spin function blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.