VOLVO
SAS-0017 - Control module. Faulty signal
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2001–2009)2005–2009
- Volvo S80 (1999–2006)2005–2006
- Volvo V70 (2000–2008)2005–2008
- Volvo V70 XC / XC70 (2001–2007)2005–2007
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The steering wheel angle sensor control module has found that global values received from the central electronic module (CEM) are wrong. The incorrect CEM data is the cause, and the stability function is blocked while the fault is present.
Mulige årsaker
- Incorrect data from the central electronic module (CEM)
Hva du kan gjøre
- 1Read and note the code, clear it and road test to see whether it returns
- 2With diagnostic equipment, check whether the CEM module has its own fault codes, since this fault concerns data from it
- 3Have a workshop fault-trace the central electronic module (CEM) system, since the data problem starts there
- 4The stability function stays blocked while the fault is present, so have a workshop repair it promptly
Symptomer du kan merke3
- Anti-spin warning lamp comes on
- General warning lamp comes on
- Stability control not working
Hva feilen kan påvirke1
- Stability function blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.