VOLVO
SAS-0018 - Steering wheel position signal R4. Signal too low. Intermittent fault
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
Steering wheel position signal R4 reads too low. The fault is intermittent: it has occurred at some point but may not be active right now. The cause may be poor connections, a break, a short to ground, or a faulty SAS element.
Mulige årsaker
- Poor contact or oxidation in connections or connectors
- Open circuit
- Short circuit to ground
- Defective SAS element
Hva du kan gjøre
- 1Clear the code and road test the car to see whether it returns
- 2Check that the connectors at the sensor are firmly seated, clean and free from oxide
- 3Follow the wiring from the sensor and look for breaks, chafing and pinched sections
- 4With a multimeter, check that no wire from the sensor is short-circuited to the body (ground)
- 5While the fault is present, stability control is off, so have a workshop repair it promptly
Symptomer du kan merke3
- Anti-spin warning lamp is on
- Stabilising function absent
- Anti-spin does not work
Hva feilen kan påvirke2
- Stability control disconnected
- Anti-spin function blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.