VOLVO
SAS-0046 - Steering wheel angle signal B. No signal. Permanent fault
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerS80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
Steering wheel angle signal B is missing, and the fault is permanent: it is present now. The cause may be oxide or contact resistance at a connector in the sensor control module or steering wheel module, a break in the signal wires, or an internal fault in the control module.
Mulige årsaker
- Oxide or contact resistance at a connector in the sensor control module or steering wheel module
- Break in the signal wires
- Internal fault in the sensor control module
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns straight away
- 2With diagnostic equipment, read signal B in live data and turn the wheel to both end stops; the status should switch between ON and OFF
- 3Check the connectors at the sensor control module and the steering wheel module for oxide and contact resistance
- 4If the connectors are sound and the wiring is intact, a workshop may need to replace the steering wheel angle sensor
- 5Stability control is off while the fault is present, so have a workshop repair it promptly
Symptomer du kan merke3
- Anti-spin warning lamp on
- Stabilising function absent
- Anti-spin does not work
Hva feilen kan påvirke2
- Stability function disconnected
- Anti-spin function blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.