VOLVO
SAS-0049 - Control unit voltage supply. Signal faulty
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The voltage supply to the steering wheel angle sensor control module is registered as faulty. The cause may be poor contact at a connector on the sensor control module or steering wheel module, or an internal fault in the control module.
Mulige årsaker
- Contact resistance or oxidation at a connector on the sensor control module or steering wheel module
- Internal fault in the control module
Hva du kan gjøre
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check that the connectors at the sensor control module and the steering wheel module are firmly seated and free from oxide
- 3With diagnostic equipment, read the codes again after the connectors have been checked; if the code does not return, poor contact or oxide was probably the cause
- 4Check the wiring between the control module and the sensor for breaks and chafing; if no fault is found, a workshop may need to replace the sensor
- 5The anti-spin lamp is on, so have a workshop repair the fault promptly if it returns
Symptomer du kan merke1
- Anti-spin warning lamp is on
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.