VOLVO
SAS-B10AC28 - Cruise Control Switch. General Signal Failures. Signal bias level out of range / zero adjustment failure
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (8)
- Volvo C30 (2007–2013)2011Kun motor: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011Kun motor: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011Kun motor: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Kun motor: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
The signal from the cruise control switch is offset or wrongly zeroed, so the cruise control does not work. The cause is a communication fault between the stalk and the left-hand steering wheel switch (SWSL).
Mulige årsaker
- Communication fault between the stalk and the left-hand steering wheel switch (SWSL)
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Try the cruise control buttons and controls to see whether the function responds
- 3Read and note the code, clear it and road test to see whether it returns
- 4With diagnostic equipment, read the stalk signals in live data while pressing the buttons, and check that they respond
- 5The steering wheel angle sensor is part of the car's safety systems, so have a workshop repair the fault promptly if it returns
Symptomer du kan merke1
- Cruise control does not work at all
Hva feilen kan påvirke1
- Cruise control stays deactivated for the rest of the journey
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.