VOLVO
SAS-B124F71 - Steering Wheel Navigation Switch Pack. Mechanical Failures. Actuator stuck
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (8)
- Volvo C30 (2007–2013)2011Kun motor: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011Kun motor: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011Kun motor: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Kun motor: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
One or more buttons on the RTI keypad have been activated for too long, and the code is set. The steering wheel navigation controls do not work because a button has stuck.
Mulige årsaker
- A button on the RTI keypad has stuck in the activated position
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Press the RTI keypad buttons one at a time and check whether any stays pressed
- 3Read and note the code, clear it and road test to see whether it returns
- 4With diagnostic equipment, follow the button status in live data and see whether any button remains in the activated state
- 5The steering wheel angle sensor is part of the car's safety systems, so have a workshop repair the fault if it remains
Symptomer du kan merke1
- Steering wheel navigation controls do not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.