VOLVO
SAS-C009305 - Steering Angle Sensor (SAS) - task overstepping double control CAN MCU (main ECU). General information. Programming fault
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellXC90 (2003–)
Hva betyr feilkoden?
The double check in the main processor of the sensor control module has overrun the time allowed for one task, which gives an internal fault. Stability control is blocked while the fault is present.
Mulige årsaker
- Internal fault in the sensor control module (SAS)
Hva du kan gjøre
- 1Clear the code and road test the car to see whether it returns
- 2Turn the wheel fully right, then fully left, set it straight ahead and read the code again
- 3With diagnostic equipment, follow the status counters; a high number of incorrect driving cycles means a recurring fault
- 4If the code returns, have a workshop replace the steering wheel module (SWM)
- 5Stability control stays blocked while the fault is present, so have a workshop repair it promptly
Symptomer du kan merke3
- Anti-spin warning lamp on
- General warning lamp on
- Stability function not working
Hva feilen kan påvirke1
- Stability function blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.