VOLVO
SAS-C010029 - Analogue sensor 1 outside limit. General signal fault. Signal invalid
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellXC90 (2003–)
Hva betyr feilkoden?
Analogue sensor 1 in the steering wheel angle sensor is outside its limit, which is due to a fault within the sensor. The stability function is blocked while the fault is present.
Mulige årsaker
- Fault within the angle sensor
Hva du kan gjøre
- 1Read and note the code, clear it and road test to see whether it returns
- 2With diagnostic equipment, read the counters: many incorrect driving cycles point to a recurring fault, few to a temporary one
- 3If the fault returns, have a workshop replace the contact reel with the angle sensor, and the steering wheel module if the code comes back
- 4The stability function stays blocked while the fault is present, so have a workshop repair it promptly
Symptomer du kan merke1
- Anti-spin warning lamp is on
Hva feilen kan påvirke1
- Stability function blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.