VOLVO
SAS-C1B0000 - Steering angle sensor. General Failure Information. No sub type information
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (8)
- Volvo C30 (2007–2013)2011Kun motor: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011Kun motor: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011Kun motor: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Kun motor: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
The steering angle sensor (SAS) has registered that its calibration data in the EEPROM memory has been erased. Until the steering wheel is turned a short distance either way, the sensor reports to the brake control module (BCM) that it is not initiated, so the angle is unknown. The fault is an internal fault in the sensor.
Mulige årsaker
- Internal malfunction within the steering angle sensor (SAS).
Hva du kan gjøre
- 1Turn the steering wheel a short distance in either direction so the sensor recalibrates. The code may then disappear.
- 2If the code is still stored, clear it and test drive the car. With a diagnostic tool, check that the fault does not return.
- 3If the fault remains, have a workshop replace the steering angle sensor (SAS).
- 4The sensor affects the stability function. Have a workshop do the repair rather than working on the steering wheel yourself.
Symptomer du kan merke2
- The traction control warning lamp lights up
- The stability control system does not work
Hva feilen kan påvirke1
- Active yaw control (AYC) is blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.