VOLVO
SAS-C1B0062 - Steering angle sensor. Algorithm Based Failures. Signal calculation failure
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
Two processors in the steering angle sensor calculate the steering angle from the sensor's information and compare the results. The code is set when the results do not match, which is caused by an internal fault in the sensor.
Mulige årsaker
- Internal fault in the steering angle sensor (SAS).
Hva du kan gjøre
- 1Turn the wheel fully one way, then fully the other, and set it straight ahead with the ignition on. Check whether the code is still stored.
- 2With a diagnostic tool, read the number of drive cycles with a fault and compare it with those without one. Many incorrect cycles point to a recurring fault.
- 3If the code returns after a test drive, have a workshop replace the steering wheel module (SWM).
- 4The angle sensor affects the anti-spin and stability functions. Have a workshop carry out the repair rather than working on the steering wheel yourself.
Symptomer du kan merke5
- A yellow warning symbol and text message show in the display
- The anti-spin and anti-skid warning lamp lights up or behaves abnormally
- The anti-spin function does not work
- The stability function does not work
- The active chassis does not work
Hva feilen kan påvirke1
- The sensor warns the other control modules that the data it sends is wrong
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.