VOLVO
SAS-C1B0085 - Steering angle sensor. Bus Signal / Message Failures. Signal above allowable range
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The steering angle sensor (SAS) is reporting a steering angle larger than the wheel can physically be turned. This almost always means the sensor or the clock spring has been fitted one turn out or is incorrectly adjusted. The other systems are then told that the steering angle cannot be trusted.
Mulige årsaker
- The steering angle sensor is misadjusted, for example after a wheel alignment or steering work
- The sensor or clock spring has been fitted one turn out
- Damaged steering angle sensor
Hva du kan gjøre
- 1Find out whether the steering wheel, steering wheel airbag, clock spring or steering has recently been removed or serviced
- 2Have a workshop check that the steering angle reads zero with the wheels straight ahead and calibrate the sensor
- 3If the sensor was fitted one turn out, the clock spring may have been damaged at full lock and need replacing
- 4Drive carefully, as the stability systems are not working
Symptomer du kan merke3
- Yellow warning symbol and message in the display
- Traction and stability control do not work
- The active chassis does not work
Hva feilen kan påvirke1
- The module tells the other systems that the steering angle is invalid, and the functions that need it are disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.