VOLVO
SAS-E000 - Control module communication. Faulty communication
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The steering angle sensor (SAS) sends and receives information over the CAN network. The code is set when serious interference blocks CAN communication. The control module then shuts itself off from the network and stays off until the power has been cut.
Mulige årsaker
- Short circuit between the CAN wires.
- Open circuit in one of the CAN wires.
- Internal fault in the steering angle sensor (SAS).
- Internal fault in another control module on the same part of the CAN network.
Hva du kan gjøre
- 1Check that the battery terminals and cables are tight and clean.
- 2If the anti-spin warning lamp stays lit after the battery check, have a workshop read the fault codes and measure the CAN wiring.
- 3Have a workshop check the CAN wiring for short circuits and open circuits, and replace the wiring if needed.
- 4The angle sensor is connected to the stability system. Have a workshop carry out the fault tracing and repair rather than working in the steering system yourself.
Symptomer du kan merke2
- The anti-spin warning lamp lights up
- The stability function does not work
Hva feilen kan påvirke2
- The sensor shuts itself off from the CAN network (bus-off)
- It tries to communicate again when the power is switched on
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.