VOLVO
SAS-U014000 - Lost Communication With Central electronic module. General Failure Information. No sub type information
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
This code means the steering angle sensor has lost its link to the central electronic module (CEM). It is set when communication between them has been interrupted. The cause may be a break in the CAN wiring between the modules, or a malfunction inside the CEM.
Mulige årsaker
- Break in the CAN wiring between the steering angle sensor and the central electronic module (CEM).
- Malfunction inside the central electronic module (CEM).
Hva du kan gjøre
- 1Check that the fuses for the CEM are intact. Their location is shown in the owner's manual or on the fuse box cover.
- 2With a diagnostic tool, read the fault codes in the CEM first and note which other control modules show communication faults.
- 3Clear the code and test drive the car to see whether it returns.
- 4Have a workshop check the CAN wiring for short circuits and open circuits, and reprogram the angle sensor with the latest software if the other checks show nothing.
- 5The angle sensor is part of the steering and stability system. Have a workshop carry out the fault tracing rather than working on the steering wheel yourself.
Symptomer du kan merke5
- The information lamp lights up
- The anti-spin and anti-skid warning lamp lights up or behaves abnormally
- The anti-spin, stability and traction functions do not work
- The active chassis (Four-C) does not work
- A yellow warning symbol and text message show in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.